PRODUCT FEATURES

1. The machine has independent power mechanism and electrical system, and centralized control by button, PLC programming and relay control. It can realize two operation modes of point moving and semi-automatic, which are mainly used for the automatic measurement of transmission shaft assembly length and the tension test of card spring. The online use greatly improves the work efficiency and the stability of product testing. The measured length adopts 3T hydraulic cylinder stroke of 400mm. With the displacement ruler, the upper and lower limit value can be set, and the automatic sound and optical alarm exceeds the limit., The displacement detection accuracy is less than 0.3mm and the pressure control accuracy is less than 50 KG.

2. The pull and clamping adopts two-stage type, the left and right opening is 150mm, the upper and lower pull head distance is 200mm, the tension adopts 3T hydraulic cylinder stroke 250mm pull spring, test the card spring tension, and the touch screen can display, set the upper and lower pressure value, and control the pressure. Overpressure automatic alarm, travel detection. The positioning surface of the pull clamp is fixed with strong magnet.

3. The 4T hydraulic cylinder shall automatically clamp the workpiece, and the wire rod adjustment height is greater than or equal to 250mm, which is suitable for the workpieces of different lengths.

4. The minimum distance from the workbench to the reverse pull point is 600mm, the surface is made of no. 45 steel, and the surface requires quenching treatment hardness HRC 43-45 degrees.

5. The motor adopts YE3 series energy-saving and efficient motor. Features: The working pressure and speed of the machine are controlled by proportional valve. The pressure and speed can be set on the touch screen. The travel range can be adjusted according to the process needs, suitable for 320-1100mm length of the drive shaft products.

6. Installation, commissioning and training: The supplier shall provide technical training to the operators, technical personnel and maintenance personnel of the Demander according to the requirements of the required equipment operation, so as to achieve the purpose of correct operation, use and daily maintenance of the equipment. The supplier shall provide the technical training conditions free of charge.