189-1422-7001
Products

Hot Search: Parts Ate The Hydraulic Press Metal Products Edge Cutter

YK32 small aluminum magnesium casting hydraulic trimming machine

For the flash and gate trimming of small aluminum alloy and magnesium alloy parts such as end cover or sleeve, the small-tonnage fast hydraulic trimming machine or servo fast hydraulic trimming machine is mainly used. The tonnage of the main trimming machine is 26T-50T, and the material is mainly taken up and down manually. The cost is low, the efficiency is high, and the purchase cost of the common fast trimming machine is low. The efficiency is about 6-8/min, 2800-3800/8 hours.

189-1422-7001

a.jpg PRODUCT INTRODUCTION

End cover or set of small aluminum alloy, magnesium alloy parts flying edge, gate cutting edge mainly with small tonnage of fast hydraulic side cutting machine or servo fast hydraulic side cutting machine, the main side cutting machine tonnage in 26T-50T, mainly using manual up and down material, low cost, high efficiency, ordinary fast side cutting machine procurement cost is low. Efficiency at 6-8 / min, 2800-3800 / 8 h.

a.jpg COPE OF APPLICATION

The edge cutting machine is mainly used in aluminum alloy, magnesium alloy, zinc alloy and other metal die casting edge cutting, trimming, burr and shaping process. Especially suitable for the following fields: new energy battery support, aluminum magnesium alloy products, calipers, metal tensile parts.

a.jpg technical parameter

YK32 series four-column fast hydraulic trimming machine
Model nameCompany16T25T40T50T
Maximum working pressureMpa14.3232526
Nominal forceKN160250400500
Maximum opening distancemm550600700700
Hydraulic cylinder strokemm300350400400
Table sizeaboutmm500600600600
aroundmm500500600600
sliderFast down speedmm/s240240240200
Trimming speedmm/s20202420
Fast return speedmm/s130130170160
Motor powerKW345.57.5
Blanking holemm300*200350*200350*250350*250


Service Hotline

189-1422-7001