Product introduction

1. The C-type structure of the fuselage and the four-guide structure of the upper workbench work stably and reliably.

2. The oil circuit control system uses pump control instead of traditional hydraulic valve control, which is more energy-saving and reliable.

3. PLC programming, industrial touch screen programming process parameters.

4. Precision control of displacement, speed and pressure can be adjusted on the industrial touch screen.

5. Provide remote network service, and the machine will automatically alarm for fault and maintenance.

6. It is applicable to the assembly, stamping, forming, punching, trimming, stretching and other production processes of small parts.

Product features

1. High efficiency and energy saving. The power consumption is 30% - 50% less than that of ordinary motors.

2. Low noise, noise can be controlled at about 60 dB.

3. The working position, speed and pressure can be adjusted infinitely.

4. Fast response, high pressure and position repetition accuracy.

5. High efficiency, multiple internal protection and extremely low failure rate.

6. 12 hours of continuous operation does not require cooling oil temperature.

7. The pipes and joints shall adopt SEA international standards to prevent pipeline oil leakage.

8. The button centralized control, (constant travel/constant pressure) two control modes and (adjustment/automatic) two operation modes are adopted.

9. European CE standard hydraulic system and electrical safety IP54 level.

 Scope of application

Applicable to: all kinds of small and medium-sized motors, auto parts, machine tools, aviation, electronics, electrical appliances, hardware and other parts.

1. (Model selection example: HPCS-16T) is mainly applicable to press fitting and assembly of shafts or sleeves of various parts. Trimming, forming, stamping and sealing of small parts.

2. (Model selection example: HPCS-16T/6T-E) is mainly used for pressing, assembling and forming process of metal materials, or flanging, trimming and forming of small and medium-sized metal parts.

3. (Model selection example: HPCS-16T/6T-C) is mainly used for the drawing and forming process of metal materials, such as sheet drawing and forming of small and medium-sized metal parts.

4. This series of machines has high degree of automation, high stability, energy saving and low noise. It is the latest machine to replace the traditional hydraulic machine, especially suitable for mass production of parts.